|
Brickwork Reinforcement Mesh (Ex-Mesh) 3" x 200

Share:


Brickwork Reinforcement Mesh (Ex-Mesh) 3" x 200

RM8.00

Quantity: 2000


Quantity:


uilding Materials/Expanded Metal, Mesh & Lath
Brickwork Reinforcement Mesh (Ex-Mesh) 3" x 200'
 
Preface
Reinforced brickwork is preferable to un-reinforced brickwork in all types of buildings.
When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground).
 
 
Advantages
  • It is expanded steel mesh with continuity of steel.
  • It has no joints, welds or interweaving to fail under stress.
  • The mesh is anchored immovably so that the reinforcement cannot slip under tension.
  • This is the only type of brickwork reinforcement to give such a unique combination of all these advantages.
Laying Instructions
  • The mesh should be laid flat and set in the brickwork-joints. The reinforcement must be completely embedded in mortar.
  • To be assured of its effectiveness, it is normally laid on every third brickwork-joint.
  • Overlapping must be at least 75mm (3").
 


 Inquiry - Brickwork Reinforcement Mesh (Ex-Mesh) 3" x 200